Cart: 0 Item (s)
AU$1,821.00
|
| Stock: | In Stock - Ready For Dispatch |
| Shipping: |
 Enter your post code below for exact shipping costs. Click here for more info... My Post Code: |
| Reviews: |
Item Not Yet Reviewed
Write a review... |
| Questions: |
|
| Share this: | 
|
Thor Technologies' PS10 Smart Power Station
Defend your electronic equipment with the most comprehensive solution available: Thor Technologies' Smart Power Station (including the eight outlet A12 Smart Power Board) both with its unique Dynamic Active Tracking™ protection. The combination of these two outstanding products delivers DOUBLE the protection and DOUBLE the filtration!
The PS10 Smart Power Station does not regenerate the sine wave. This means the THD (total harmonic distortion) that the power station delivers is exactly what the power utility supplies. To ensure your audio ouput isn’t compromised.
The Power Station’s default output voltage setting is 240V. On the rear of the unit this setting can be changed to a 220V Output (select the switch from 240V to 220V). Our experience has found that devices that are designed to operate on a 220Vb Power Supply will perform better when the voltage they were designed to operate on is supplied.
The Power Station output voltage display will only change when there is a 3% or more variance to the incoming voltage. This is a factory setting and normal.
About the A12 Smart Power Board
A12's failsafe barrier against virtually all categories of electrical disturbances (so common with todays power grids) is the result of 38 separate and discrete components working in both series and parallel.
In addition to these defences, there are 3 isolated banks on the Smart Board ensuring there is no “cross talk” or interference between components connected after the Smart Station.
Maximum Protection = Maximum Performance
This configuration can be argued as being the best combination available for providing pure and precise 240 volts to your valuable electrical equipment. Equipment that was designed to run on 240 volt power ensuring you get maximum performance and enjoyment for many years.
When it comes to safeguarding your equipment, Thor make no wild or glossy promises: their products do what they say they do.
Thor's Dynamic Active Tracking Circuit™
A unique Thor Technologies bonus - this protection strategy encompasses self-diagnostic and corrective circuitry. Traditional power surge protection rely on simple surge absorbing circuitry at pre-defined points on the wave form. However, Thor Dynamic Active Tracking™ monitors the sine wave, instantaneously sensing and clamping transient spikes and surges to a safe level, regardless of where they appear on the wave form.
Thor additionally filters and cleans all incoming power and through its unique 3-Bank isolation, prevents EMI and RFI pollution as well as inter-circuit back EMF - all of which are major contributors to audio-visual glitches and equipment damage.
Features Overview:
SPECIFICATIONS:
|
Supply Voltage |
240/Vac 50/Hz |
|
Maximum Current Rating |
10amps/2400 W (Va) |
|
Wave Form |
Pure Sine Wave |
|
Operating Voltage |
160V - 270V |
|
Output |
240v |
|
Incoming Voltage out of designed range (i.e. 180 - 270v) |
If input voltage was 270V then output would be approx 250 to 255V |
|
Incoming Voltage out of designed range (i.e. 160 - 270v) |
If input voltage was 140V then output would be approx 230 to 235V |
|
Double Filtration and Protection Management |
A12BB Smart Board included (info below) |
|
Dimensions (WxDxH) |
436mm x 380mm x 195mm |
|
Safety Approval No |
Q01652 |
INCLUDED: Thor Technologies' A12 Smart Board - Smart Power Management
Defend your electronic equipment with the most comprehensive solution available: Thor Technologies' Smart Board with its unique Dynamic Active Tracking™ protection. The A12's failsafe barrier against virtually all categories of electrical disturbances (so common with todays power grids) is the result of 38 separate and discrete components working in both series and parallel.
When it comes to safeguarding your equipment, Thor make no wild or glossy promises: their products do what they say they do.
Inside the Smart Board
Thor's Dynamic Active Tracking Circuit™
A unique Thor Technologies bonus - this protection strategy encompasses self-diagnostic and corrective circuitry. Traditional power surge protection rely on simple surge absorbing circuitry at pre-defined points on the wave form. However, Thor Dynamic Active Tracking™ monitors the sine wave, instantaneously sensing and clamping transient spikes and surges to a safe level, regardless of where they appear on the wave form.
Thor additionally filters and cleans all incoming power and through its unique 3-Bank isolation, prevents EMI and RFI pollution as well as inter-circuit back EMF - all of which are major contributors to audio-visual glitches and equipment damage.
Features Overview:
SPECIFICATIONS:
|
Supply Voltage |
240/Vac 50/Hz |
|
Maximum Current Rating |
10amps/2400 W (Va) |
|
Clamping Voltage |
275Vac |
|
Reaction Time |
Less than 1 Nano Sec |
|
Maximum Transient Spike Impulse Current (AMPS) |
208,000 amps. Equivalent to 52,000 amps using UL1449 Std |
|
Maximum Energy Dissipation (Joules) |
6080 Joules. Equivalent to 2050 Joules using UL1449 Std |
|
Protection Modes (all 8 outlets Protects on all 3 conductors) |
Active/Neutral, Active/Earth, Neutral/Earth |
|
EMI/RFI Noise Reduction Filter Type |
Incorporating 38 separate protection components in 3 cascading circuits |
|
Number of Multi-Stage Filter Banks |
3 |
|
Number of Isolated Banks |
3 |
|
Number of dedicated Outlets |
4+3+1 |
|
Total Number of Protected AC Outlets |
8 protected outlets |
|
Incoming Telephone Line Protection (DC) with Inline Splitter (1 in - 2 out) RJ |
1 Line in /2 lines out, RJ45 Internet/Network ready |
|
Incoming Television Aerial protection (DC) with inline splitter |
1 Line in /2 lines out |
|
Cable TV 'F' type adaptor |
Yes |
|
Earth Potential Rise Protection |
Yes |
|
Earth leakage Range |
Less than 1 milli amp |
|
Operating conditions |
Indoor / AC Mains |
|
Operating Temperatures |
-10C/+60C |
|
Safety Approval No |
Q01652 |
|
Cable length |
1.8m |
Thor Technologies - No Glossy Promises, Just the Best Products
When it comes to minimising your equipment risk, Thor Technologies make no wild or glossy promises. Thor's products do what they say they do.
The team at Thor Technologies have individually engineered each product to be the best in its class. Best price. Best performance. Best value.
There is no substitute for experience and when co-founders of Thor Technologies, Nile Ausmus and Roy Stokes developed the Surge Shield range of products there was over 65 years of experience behind the development team. Thor have grown significantly since then and this is shown by the innovation in their latest range of cutting edge products. Case in point: their Smart Series range is the most dynamic and progressive in the market.
The Surge Shield range brought power protection (which had not changed much since the early 80’s) into the new millennium. Digital technology has come a long way and is far more sensitive to power disturbances. This makes clean power an essential requirement when Home Theatre, computers or processor controlled systems are being used.
| Pre-Sales Enquiries About Us FAQ Payment Options Our Guarantee Shipping Policy Returns Policy Testimonials Contact Us |
Post Purchase Enquiries Login To Account Track Past Orders View My Favourites Return An Item Warranty Claim Customer Support |
Popular Sections Package Deals Product Reviews |
Wholesale & B2B Wholesale Hi-Fi |
E-commerce By: Payments By:  Security By: |
