Dynaudio - SUB250 II - Active Subwoofer
Call for stock levels
The Dynaudio Sub 250 II is equipped with a powerful 200 W amplifier and long-throw 24 cm woofer in a compact sealed-enclosure design.
The combination of its long-throw woofer design, large 100 mm voice coil and the cone made from Dynaudio’s own MSP (Magnesium Silicate Polymer) material enables the Sub 250 II to deliver deep yet precise and detailed bass that perfectly matches the sonic character of the Dynaudio main speakers. An ideal match between the main speakers and the subwoofer is the most overlooked part in a subwoofer-enhanced system, but the Sub 250 II will blend in seamlessly, bringing more substance and depth to any Dynaudio two-channel or surround setup. Together, the sealed cabinet enclosure, the cubic shape, the rigid MDF construction and the forward firing woofer offer remarkable bass precision and make the Sub 250 II easy to position in any room.
The amplifier circuit incorporates variable gain setting, a variable Low-Pass Filter (50 Hz to 150 Hz), and a selectable phase switch (0º or 180º). The audio signal can be fed from an AV Receiver's Subwoofer/LFE output into the LFE Input (1 x RCA), or from a Stereo Amplifier's Pre-Out into the SUB Input (2 x RCA). A selectable High-pass Filter (Flat, 60 Hz, or 80 Hz) enables the SAT Output (2 x RCA) to facilitate a crossover integration between the Sub 250 II and the main speakers.
Bass performance can be further enhanced by using a multi-sub configuration with two or more subwoofers in parallel. For this use, the Sub 250 II is equipped with a ”slave” function, which by-passes all settings on the rear and adapts the settings from a ”master” subwoofer. By positioning multiple subwoofers in a room the bass is generally more evenly dispersed, thus effectively improving the overall sound quality of the system. Two or more smaller subwoofers can even result in an ultimately superior bass performance than that achieved via one large subwoofer.
Available in an elegant Satin Black or Satin White lacquer, as well as in Rosewood or Walnut real wood veneer finishes, the Sub 250 II perfectly and discreetly integrates into any room and every décor scheme.
Write Your Own Review
Technical Specifications Frequency Response: 29 - 250 Hz (3 dB)Amplifier Power (min.): 200 WHigh-Pass Filter: Flat / 60 / 80 HzLow-Pass Filter: 50 - 150 HzPhase adjustment: 0 deg or 180 degInput/Output: LFE (1 x Cinch) Box Principle Sealed SAT Output (2 x Cinch)Box Principle: SealedWeight: 7.2 kgDimensions (W x H x D): 10.5 x 10.7 x 12.2”