Plinius - P10 - Power Amplifier
In stock & ready
True high-end performance
The P10 has a level of sophistication rarely found in such a cost effective product. This amplifier has separate input and driver stage power supply regulation and it is an amplifier capable of true high-end performance.
The large toroidal transformer will allow the P10 to deliver power levels in excess of 200 watts per channel into 8 Ohms. Difficult speaker loads are driven with ease to the most satisfying levels, while maintaining control and finesse.
Partnered with the Plinius Kaitaki preamplifier these stable mates will combine to perform at the highest level. The P10 is also highly suited to multiple custom installation use featuring a Home Theatre trigger bypass.
Available in silver or black anodised with a linished finish.
Write Your Own Review
POWER200 watts RMS per channel into 8 ohms. 300 watts RMS per channel into 4 ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortionFREQUENCY RESPONSE20Hz to 20kHz +/–2dB -3dB at 5Hz and –3dB at 70kHzDISTORTIONTypically <0.05% THD at rated power 0.2% THD and IM worst case prior to clippingCURRENT OUTPUT40A short duration peak per channel Fuse protectedSLEW RATE50V/µsHUM & NOISE90dB below rated output 20Hz to 20kHz unweightedINPUT IMPEDENCE47k ohmsGAINRCA Inputs: 32dB XLR Inputs: 38dBPOWER/CURRENT CONSUMPTION600W 0.4A (92W) Class AB Idle 0.14A (32W) StandbyDIMENSIONSHeight: 120mm (4 3/4”)Width: 450mm (17 3/4”)Depth: 400mm (15 3/4”)Weight: 14kg (30lbs)