Pro-Ject - RPM 9.2 Evolution - Turntable
Special Price $2,233.00 RRP $2,499.00
Call for stock levels
Turntable • Chassis and motor housing piano-lacquered dark grey • A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. • The medium density fibre plinth rests on three individually height-adjustable magnetic field feet. • A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping. • The motor is mounted in a separate metal housing to eliminate vibration transmission. • The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg and a brass record puck. • The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs. • Central metal block optimises centre of gravity and damps main bearing. • Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided. • External power supply avoids potential electro-mechanical interference. Tonearm Pro-Ject 9cc Evolution • The headshell and armtube are fashioned from a single piece of carbon-fibre. • Conical armtube avoids standing wave reflections. • Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces. • Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances. • Sorbothane®-damped counterweight effectively counteracts unwanted resonances. • The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g • Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. • Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). • Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. • Silicone-damped armlift can be adjusted to suit working height of the arm. • The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
Write Your Own Review
Nominal speeds 33 / 45 r.p.m.Dust cover Pro-Ject Cover it optionalRecord weight yesMotor in separate housing yesRCA phono sockets yesMagnet supported feet yesCentral metal block yesTonearm Pro-Ject 9cc EvolutionCarbon-fibre headshell and armtube yesEffective tonearm length 9" (230mm)Effective tonearm mass 8gOverhang 18mmSupplied counterweight cartridge weight 5 - 7.5g, 7 - 10g, 9 - 11g, 10 - 14gDownforce range 10 - 35mNSpeed variance ±0,5 %Wow and flutter ±0,06 %Signal to noise -73dBPlatter weight/diameter 3,5kg/300mmPower supply type Mains-fed outboard power supply220 - 240V, 50 cycles or 100 - 110V, 60 cyclesOutput voltage 16V/500mA ACPower consumption 2WDimensions 440 x 180 x 325mmWeight 10,5kg + motor unit 2kgDimensions (W x H x D)