Any home theatre system is only as good as its centre channel loudspeaker allows, as the centre is the heart of the system. The Focus 210 C Centre Channel Loudspeaker is thus equipped with the same high-quality Dynaudio soft dome tweeters and MSP mid/bass drivers in order to ideally complement the Focus models. Thus the same high level of sound quality as the main left/right channel loudspeakers is maintained to create an evenly balanced, accurately realistic and audibly cohesive soundstage across the video screen. The Focus 210 C crossover and cabinet quality is also built to the same high standards – as this is critically important to achieve a neutral, detailed and natural reproduction of the midrange. Dual mid/bass drivers are employed in parallel to attain an accurate roll-off in the bass. Thanks to its cohesive design, the Focus 210 C exhibits an excellent midrange quality for reproducing voices naturally, and remains precisely balanced even in the upper and lower bass registers. Coated 28 mm soft dome tweeter with Precision Coating for natural, clean and clear highs Two 15 cm MSP mid/woofers with aluminium voice coils for deep, precise bass down to 40Hz New slim-line die-cast aluminium baskets for increased rigidity and lower resonance Aluminium wire voice coil on new black Kapton® coil former for increased power handling 1st order crossover with 6 dB slope for perfectly linear phase coherence Highest quality crossover components for absolute sound neutrality Dynaudio Focus Components Only the highest level quality components, selected for their sonic properties, are used. A good example is the crossover: simple 1st order filters (6dB/octave), carefully wound air-coils using the purest copper, choice Solen capacitors, and zero temperature drift ceramic resistors all combine to enable a superior transient response. Time and experience drive the meticulous process of selecting and matching veneer from the finest wood available, followed by careful sanding and French-polishing. All models in the Focus range feature a gentle asymmetrical taper towards the back of the cabinet. This wasn’t done just for aesthetical reasons: The distinctive shape prevents internal resonance, as the side walls are not parallel. Additional damping, strengthening and bracing in critical sections further reduces unwanted resonance. The highly sophisticated, asymmetrically shaped Focus cabinets achieve a level of quality only possible through many years of experience. Another Dynaudio technical innovation is the use of pure aluminium for voice-coils. In comparison to the more commonly used heavy copper, this allows for unusually large diameter voice-coils that remain extremely light. In combination with the new, even stronger magnet material used in the drivers developed for the Focus range, cone movement is more controlled – cone excursion following the music signal from an amplifier with precision and perfection. The New Dynaudio Focus Series The new Dynaudio Focus Series sounds more open and transparent, more detailed and dynamic and more precise than ever before. Every model has been improved in every way: new drive units, a refined cabinet shape and styling, improved cabinet construction, new fine-tuned crossovers, and an additional floor stand model. In their short lifetime, the Dynaudio Focus range has received numerous awards and tremendous praise from audio journalists and music lovers. Why? Because this range perfectly illustrates where technology, innovation and experience unite: a design concept that reinterprets Dynaudio’s classics. The latest Dynaudio driver unit generation is introduced in the new Focus models: Soft dome tweeters featuring a new, improved precision coating; midrange and woofers with newly developed voice coil assemblies and sound-optimised, die-cast aluminium driver baskets; synergistically united via further-refined crossover designs - all housed in an improved cabinet construction. The overall result: The Dynaudio Focus range not only sounds but looks better than ever before while featuring the most advanced loudspeaker technology and performance in its class, with each and every model delivering a new, higher level of sound quality. Dynaudio Focus Series II 210C Centre Channel Loudspeaker Specifications Sensitivity 88 dB IEC Power handling > 250 W Impedance 4 Ω Frequency Response 40Hz – 25 kHz (± 3 dB) Weight 13.3 kg Dimensions (W x H x D) 640 x 173 x 285 mm About Dynaudio Dynaudio loudspeakers are held in the highest esteem by the recording engineers of the world’s most prominent recording studios - in fact the demanding British Broadcasting Corporation (BBC Radio & Music) selected Dynaudio as the exclusive reference monitor for all of their modern recording and radio studios. Founded over 30 years ago, when a group of engineers in Skander borg, Denmark who shared the passion for music came to the mutual conclusion that even the best loudspeakers available at the time were incapable of playing music without colouration. Phase shifts, propagation errors, distortion and poor transient response were clearly measurable and audible with virtually all loudspeakers. From that date, Dynaudio has been dedicated to Authentic Fidelity, ambitiously setting forth to create a completely new and modern generation of loudspeakers based on their dedicated ground-breaking research. Their efforts over this time have resulted in innovative and technologically advanced developments that are at the foundation of Dynaudio’s unparalleled performance. Innovations such as Dynaudio Directivity Control (DDC) technology have established Dynaudio loudspeakers as a sound quality reference worldwide, and over the years many different Dynaudio models have become audiophile classics: True loudspeaker legends for true music lovers.
SpecificationsTechnical Specifications Sensitivity: 88 dB IEC Power Handling: > 250 W Impedance: 4 Ohms Frequency Response: 43 Hz - 23 kHZ (3 dB)Weight: 13.3 kg Dimensions (W x H X D): 25.2 x 6.8 x 11.2”