Taking integrated refinement to a new level, the Hautonga is an amplifier that has set new standards for performance, ease of use and reliability.
The rear panel has five line level RCA inputs with Phono RCA and a balanced XLR pair additional as standard. There is a Pre Out for those that only want to use the preamp stage and the Line Out connection for archiving or other ancillary equipment. Trigger in and out connectors provide for multi-room or home theatre simplicity.
A full function remote lets you scroll through inputs from your seat. HT Bypass, standby mode for true low power operation that keeps the circuit active to deliver peak performance with minimal delay, mute and volume controls, display brightness adjustment and the full complement of CD player functions are all available from the remote.
Careful attention has been paid to signals and circuit layout with short signal paths, optimal component placement and wiring specification working in harmony to extract exciting depth and detail from any musical recording.
POWER200 watts RMS per channel into 8 ohms. 280 watts RMS per channel into 4 ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB -3dB at 5Hz and -3dB at 70kHzDISTORTIONTypically <0.05% THD at rated power 0.2% THD and IM worst case prior to clippingCURRENT OUTPUT40A short duration peak per channel Fuse protectedSLEW RATE50V/µsHUM & NOISE90dB below rated output 20Hz to 20kHz unweightedINPUT IMPEDENCE47k ohms all inputsRATED PRE OUT LEVEL1.5V RMS into 47k ohms or higherPRE OUT SOURCE IMPEDENCETypically 1.5k ohmsPRE OUT MINIMUM RECOMMENDED LOAD47k ohmsLINE OUT LEVEL190mV at 200 ohmsGAINLine inputs to speaker out: 40dB Phono Input To Pre-Out: 66dB on high gain, 60dB on low gainPOWER/CURRENT CONSUMPTION600W 0.4A (92W) Class AB Idle 0.14A (32W) StandbyDIMENSIONSHeight: 120mm (4 3/4")Width: 450mm (17 3/4")Depth: 400mm (15 3/4")Weight: 14kg (30lb)