Clearaudio - Nano Phono V2 - Phono Preamplifier
In stock & ready
The Nano Phono stage isn't ruffled by anything
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
Write Your Own Review
AMPLIFICATION @ 1 KHZ 34 dB to 48 dB (MM mode)54 to 68 dB (MC mode)INPUT IMPEDANCE 47 kOhm / 220 pF / MM modeIndividual / User / MC modeMM / MC INPUT switchable by jumper (at bottom)SUBSONIC FILTER switchable by jumper (at bottom)RIAA delay time: 75 μs / 318 μs / 3180 μsRIAA ACCURACY ± 0.4 dB @ 20 Hz - 50 kHzTHD < 0,006% MC ("A" weighted @ 1 kHz / -1 dB @ Max)HEADROOM 18 dB / MCSIGNAL TO NOISE RATIO 70 dB ("A" Weighted)81 dB ("A" Weighted)CHANNEL SEPARATION > 80 dB @ 1 kHz / opposed channel hot-wiredMAX. OUTPUT VOLTAGE 10 V eff. (1 kHz)POWER SUPPLY ± 18 V DC / 300 mA (external power supply)INPUT / OUTPUTS unbalanced (RCA)POWER CONSUMPTION Max. consumption: 2.3 WattConsumption in operation: 2.3 WattStandby mode: < 0.3 WattOff mode: 0.0 WattTOTAL WEIGHT 500 gram (Phonostage and power supply)DIMENSIONS (W/D/H in inches) 3.35 x 4.17 x 0.98DIMENSIONS (W/D/H in mm) 85 x 106 x 25WARRANTY 3 years** Only if the Manufacturer's guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.